Just to clarify, when the connection is first setup are you selecting the broadcast SSID in available networks or do you have to manually define the network and all of the properties?
Charles -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[EMAIL PROTECTED] On Behalf Of John Watters Sent: Tuesday, August 05, 2008 1:51 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: [WIRELESS-LAN] Problem With WPA2 & Cisco WiSM Controllers We have run across a problem implementing WPA2 that I could use some help with. We are using Cisco WiSM controllers with a variety of Cisco LWAPPs. We set up WPA2 (with WPA compatibility) to use AES/CCMP and PEAP/MS-CHAPV2. All works fine with non-Windows supplicants (eg, Intel or Lenova). However, using the built-in Windows supplicant, we get one connection when it is first set up and can never connect again. We suspect our VeriSign certificate on the FreeRadius server as the cause of our problem. But, we are certainly not sure. MACs (newer ones anyway) and Vista machines do just fine. We have tried WinXP SP2 & SP3 -- both behave the same. Can anyone point me in the right direction? Thanks. -jcw ------------------------------------- John Watters UA: OIT 205-348-3992 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
