We've got some Cisco 1200's that we're looking at converting over to
LWAPP. Could someone tell me if the 802.11g radio AIR-MP31G is supported
with the 5.2.178.0 controller code?
From the release notes it lists:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn521780.html#wp233793
"Only Cisco Aironet 1200 Series Access Points that contain 802.11g
(AIR-MP21G) or second-generation 802.11a radios (AIR-RM21A or AIR-RM22A)
are supported for use with controller software releases. The AIR-RM20A
radio, which was included in early 1200 series access point models, is
not supported."
It fails to mention anything about the MP31G radios.
The release notes for the AP seem to indicate it is supported:
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html#wp31354
You can use the Autonomous to Lightweight Mode upgrade tool to install
Cisco IOS Release 12.3(11)JX on these access points:
*All modular 1200 series access points running Cisco IOS software and
containing these supported radios:
–802.11g: MP21G, MP31G
Thanks everybody,
--
Dave Habben
Coordinator of Network Services
Sauk Valley Community College
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
