My converted AIR-AP1231G-A-K9s (b/g) and my AIR-AP1242AG-A-K9s (a/b/g) seem to be doing fine under 5.2.178.0.
-jcw ------------------------------------- John Watters UA: OIT 205-348-3992 -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Dave Habben Sent: Wednesday, June 10, 2009 5:01 PM To: [email protected] Subject: [WIRELESS-LAN] Cisco radio AIR-MP31G supported on a WLAN Controller running 5.2? We've got some Cisco 1200's that we're looking at converting over to LWAPP. Could someone tell me if the 802.11g radio AIR-MP31G is supported with the 5.2.178.0 controller code? From the release notes it lists: http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn521780.html#wp233793 "Only Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G) or second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with controller software releases. The AIR-RM20A radio, which was included in early 1200 series access point models, is not supported." It fails to mention anything about the MP31G radios. The release notes for the AP seem to indicate it is supported: http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html#wp31354 You can use the Autonomous to Lightweight Mode upgrade tool to install Cisco IOS Release 12.3(11)JX on these access points: *All modular 1200 series access points running Cisco IOS software and containing these supported radios: -802.11g: MP21G, MP31G Thanks everybody, -- Dave Habben Coordinator of Network Services Sauk Valley Community College ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
