UBC upgraded our campus (39 controllers consisting of 4402's 4404's WiSM's and 5508's) on July 18th to 6.0.182.
-We had some AP's with Static IP's that needed attention. -We also noticed that the wired ACL in 6.0x doesn't work - we noticed this even during our 6.0 beta test. -AP's that were located at remote sites (via DSL/cable) that were directly connected to controllers, are now having difficulty connecting to controllers running 6.x The solution has been to put these AP's into office extend mode or HREAP mode, where the latency timers are longer. Thanks Ian Procyk UBC IT 604-827-5707 -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:wireless-...@listserv.educause.edu] On Behalf Of Dennis Xu Sent: Wednesday, August 05, 2009 7:15 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: [WIRELESS-LAN] WiSM 6.0.182.0 Has anybody upgraded to WiSM 6.0.182.0? Any feedback? Thanks! Dennis Xu Network Analyst Computing and Communication Services University of Guelph 5198244120 x 56217 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.