Might you have proxy-dhcp enabled (is by default) on the controllers? I ran into bug CSCsx96815 when I went to 5.2.157 in the past which caused clients to not receive an address (the virtual address was corrupted through an upgrade).
-- Garry Peirce +1-207-561-3539 Network Analyst, ITS University of Maine System > -----Original Message----- > From: The EDUCAUSE Wireless Issues Constituent Group Listserv > [mailto:[email protected]] On Behalf Of Lee H Badman > Sent: Thursday, August 20, 2009 10:46 AM > To: [email protected] > Subject: Re: [WIRELESS-LAN] WiSM 6.0.182.0 > > Peter, > > Can you describe your bus implementation in more detail? > > -Lee > > -----Original Message----- > From: The EDUCAUSE Wireless Issues Constituent Group Listserv > [mailto:[email protected]] On Behalf Of Peter Arbouin > Sent: Wednesday, August 19, 2009 11:14 PM > To: [email protected] > Subject: Re: [WIRELESS-LAN] WiSM 6.0.182.0 > > Hi, > > We also upgraded to 6.0 > We have several aps on busses using HREAP. For some reason clients were > not able to get a valid ip and we had to revert to the previous version > of code. Anyone else seen this issue? > > Another issue is some random hosts have issues getting an ip address by > DHCP in some locations, but work fine in other locations. > > The WCS interface is far better than previous versions. > > Peter. > > > -----Original Message----- > From: The EDUCAUSE Wireless Issues Constituent Group Listserv > [mailto:[email protected]] On Behalf Of Procyk, Ian > Sent: Thursday, 6 August 2009 5:11 AM > To: [email protected] > Subject: Re: [WIRELESS-LAN] WiSM 6.0.182.0 > > UBC upgraded our campus (39 controllers consisting of 4402's 4404's > WiSM's and 5508's) on July 18th to 6.0.182. > > -We had some AP's with Static IP's that needed attention. > > -We also noticed that the wired ACL in 6.0x doesn't work - we noticed > this even during our 6.0 beta test. > > -AP's that were located at remote sites (via DSL/cable) that were > directly connected to controllers, are now having difficulty connecting > to controllers running 6.x The solution has been to put these AP's > into office extend mode or HREAP mode, where the latency timers are > longer. > > > > Thanks > Ian Procyk > UBC IT > 604-827-5707 > > > -----Original Message----- > From: The EDUCAUSE Wireless Issues Constituent Group Listserv > [mailto:[email protected]] On Behalf Of Dennis Xu > Sent: Wednesday, August 05, 2009 7:15 AM > To: [email protected] > Subject: [WIRELESS-LAN] WiSM 6.0.182.0 > > Has anybody upgraded to WiSM 6.0.182.0? Any feedback? > > Thanks! > > Dennis Xu > Network Analyst > Computing and Communication Services > University of Guelph > 5198244120 x 56217 > > ********** > Participation and subscription information for this EDUCAUSE > Constituent Group discussion list can be found at > http://www.educause.edu/groups/. > > ********** > Participation and subscription information for this EDUCAUSE > Constituent Group discussion list can be found at > http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
