Since I didn't get a response, I figured I'd post what I've done. I've shut off 1, 2, and 5.5 Mbps data rates on the 2.4Ghz band, enabled ClientLink on both bands, and switched the A band to 40Mhz channels.
So far, so good. On Mon, Feb 22, 2010 at 5:01 PM, Mike King <[email protected]> wrote: > I'm bringing up my first controller that's on the 6.x code. Previously, > we've only run the 4.2 code for stability reasons, but we now have a fresh > batch of 1142N AP's and a couple of 5508 Controllers. > > I'd say that 90% of my clients have N wireless cards, and we're planning on > being pretty dense with the AP coverage. > > That being said, what changes (tuning) have you guys that have been running > 6.x code and N access points done? > > Over the years there have been many "tweaks" that people have suggested > (Timer changes and whatnot). I just wonder if any of this stuff is still > valid? > > The only tweak I'm planning on doing is disabling the lower data rates. (I > am soliciting suggestions on what rates to disable) But I'm open to any > suggestions. > > Mike > ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
