Mike- Have you done any testing with ClientLink?
-Lee Lee H. Badman Wireless/Network Engineer Information Technology and Services Adjunct Instructor, iSchool Syracuse University 315 443-3003 ________________________________ From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Mike King Sent: Tuesday, March 02, 2010 9:17 AM To: [email protected] Subject: Re: [WIRELESS-LAN] New 5508 Wireless Controller Since I didn't get a response, I figured I'd post what I've done. I've shut off 1, 2, and 5.5 Mbps data rates on the 2.4Ghz band, enabled ClientLink on both bands, and switched the A band to 40Mhz channels. So far, so good. On Mon, Feb 22, 2010 at 5:01 PM, Mike King <[email protected]<mailto:[email protected]>> wrote: I'm bringing up my first controller that's on the 6.x code. Previously, we've only run the 4.2 code for stability reasons, but we now have a fresh batch of 1142N AP's and a couple of 5508 Controllers. I'd say that 90% of my clients have N wireless cards, and we're planning on being pretty dense with the AP coverage. That being said, what changes (tuning) have you guys that have been running 6.x code and N access points done? Over the years there have been many "tweaks" that people have suggested (Timer changes and whatnot). I just wonder if any of this stuff is still valid? The only tweak I'm planning on doing is disabling the lower data rates. (I am soliciting suggestions on what rates to disable) But I'm open to any suggestions. Mike ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
