Hi all, I am new to this group. I hope you are all doing well. I work for TEKsystems in Raleigh, NC as an IT recruiter and would love to network with anyone interested in hearing about new job opportunities. I currently have a position available at Cisco in RTP as a wireless LAN engineer. If you or anyone you know are interested in hearing more, please feel free to send me your resume and I will contact you asap.
Thanks in advance for your time. The position is a long term contract!! Job Description: We are looking for a person to join the wireless lan team to respond to cases as they come in. Will be given easier tasks first to learn the process and as they get more comfortable will be given harder cases. The manager expects individual to be handling cases on their own within a month of starting. Must have hands on experience with wireless access points and controllers. Person needs to have hands on experience supporting this type of wireless lan products, devices, and technologies. Person will interact with various groups such as the service team, sales engineers, and other engineering teams. Great customer service skills are extremely important to the team, so they must be well spoken. Will be required to determine root cause and resolution for previously unknown problems. Will be expected to go above and beyond to learn the products they are supporting and also share with the rest of the team. Additional Job Info: These are all of the products, devices and technologies that are being supported on this escalation team: Wireless Access Points * Wireless Client Association * Wireless Controllers * CSMA/CA, RTS, CTS protocols * RF transmission * Antennas * IEEE 802.11 standards (a,b,g), 802.1x Wi-Fi * 802.1Q Trunking * Ether channel * Strong understanding of LAN Switching technologies (VLAN's) * WLAN Security in the areas of authentication, encryption, IDS/IPS using Radius, AAA authentication, EAP, LEAP, PEAP, PSK * AES-CCMP encryption (AES- Counter w. CBC MAC Protocol) * Wireless Sniffers * WEP encryption (Wired Equivalent Privacy * WPA (Wi-Fi Protocol Access), WPA2 * Cisco LWAPP and IOS based solutions * WLSM, WiSM, WCS Top 3 Skills (stack ranked) : 1-IEEE 802.11 standards (a,b,g) 802.1x wi-fi, 2-wireless access points, 3-wireless client association Mike Robinson Technical Recruiter 1201 Edwards Mill Rd Suite 201, Raleigh, NC 27607 Office: (919) 816-1518 Cell: (704) 798-6887 [cid:[email protected]]<http://www.teksystems.com/> From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Lawrence, Bill Sent: Thursday, December 02, 2010 3:25 PM To: [email protected] Subject: Re: [WIRELESS-LAN] Mount hidden or in plain view in dorms? We've mounted them below the ceiling from the very first installations with the exceptions of some access points serving antennas on the building exterior. We have experienced less than six stolen access points in roughly 10 years. I don't recall any units actually being vandalized. We did have some folks in our Facilities department express concerns with aesthetics of access points below the ceiling in the early days, but they have come to realize that the access points tend to blend in with the exit signs, smoke detectors, etc. after a short period of time. We do try to use access points with built in antennas e.g. Cisco 1142, where possible. -------------------------------------------------------------- Bill Lawrence RCDD, NTS, WD Georgia Institute of Technology Office of Information Technology 258 4th Street NW Atlanta, GA 30332 Ph: 404-894-9504 Fax: 404-894-3599 From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Fleming, Tony Sent: Thursday, December 02, 2010 2:33 PM To: [email protected] Subject: [WIRELESS-LAN] Mount hidden or in plain view in dorms? Crew, We hide our access points above ceiling grids. Our logic is the devices are out of site and less prone to vandalism (in fact we have had zero vandalism). One concern that has been expressed by our wireless team is the congestion above the ceiling grid - pipes, HVAC ducting, lighting and cables. It is logical that all of these obstructions do not help RF propagation and create sources of interference. My question for you guys: Did any of you change your mounting locations from above ceiling grid to below the grid (visible)? Did you notice substantial signal improvement? What is the vandalism rate? Did your facilities/administrative folks express any concerns about the AP visibility? ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic email or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply email so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety. Thank you. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
<<inline: image001.gif>>
