Hi,
We're configuring our first Cisco thin AP deployment using AP3600s.
In a particular high density coverage area we been requested to set the TX
power levels to 12mW and 25mW for the 2.4/5.0 bands respectively. I've
calculated that a setting of '4' should provide the 12 mW setting for the
2.4 but I'm somewhat confused about the 5.0. It appears that the max
power in the 5.0 differs when using UNII-1 channels vs. UNII-2 channels
vs. UNII-3 channels. Do I have this correct?
........thanks in advance...................J
Jamie Savage | Senior Communications Technician | University
Information Technology
010 Steacie Science Building | York University | 4700 Keele St. ,
Toronto ON M3J 1P3 Canada
T: 416.736.2100 x22605 | F: 416.736.5830 | [email protected] |
www.yorku.ca
York UIT will NEVER send unsolicited requests for passwords or other
personal information via email. Messages requesting such information are
fraudulent and should be deleted.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
