Hi. Are you using RRM to manage the radios? If so what is the reported power output RRM is setting? If you manually set power to max do you get a performance increase? We have both 3602i and 3602e series with dipoles you mention with no issues. We are running 7.2 code currently but plan to goto7.5 later this summer.
-Jimmy University of Michigan On Tue, Apr 30, 2013 at 11:36 AM, Linchuan Yang <[email protected]>wrote: > Dear All**** > > ** ** > > We found that the signal strength of cisco Aironet 3602E (with omni > directional antenna AIR-ANT2524DW-R) on 5GHz is quite unstable (2.4GHz is > good). I am using a HP win7 laptop, and sitting 5 meters away from the AP. > Usually the signal strength on the laptop is only one or two bars (out of > 5). However, I use some third party application (e.g. Xirrus, Ekahau), the > signal strength is -47 (almost same value as shown on the controller). Do > you have the similar problem? Is it a bug of Win7 or Cisco WLC (We are > using version 7.2.111.3)?**** > > ** ** > > Have a nice day.**** > > ** ** > > Yours,**** > > Linchuan Yang (Antony)**** > > Wireless Networking Analyst > Network Assessment and Integration, > IITS-Concordia University > Tel: (514)848-2424 ext. 7664**** > > ** ** > > ** ** > ********** Participation and subscription information for this EDUCAUSE > Constituent Group discussion list can be found at > http://www.educause.edu/groups/. > > -- James Helzerman Wireless Network Engineer University of Michigan - ITS Communications Systems and Data Centers Phone: 734-615-9541 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
