Thank you, Chris and Jimmy In fact, I configured the power level of 5GHz to level 1. And I think this maybe the issues with the display of the signal strength. However, with 3602I and other model, we do not see the similar problem.
Yours, Linchuan Yang (Antony) Wireless Networking Analyst Network Assessment and Integration, IITS-Concordia University Tel: (514)848-2424 ext. 7664 From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Chris Murphy Sent: April-30-13 11:54 AM To: [email protected] Subject: Re: [WIRELESS-LAN] Question about the signal strength of cisco Aironet 3602E on 5GHz Are you seeing actual performance issues, or just issues with the display of signal strength? -Chris Hi. Are you using RRM to manage the radios? If so what is the reported power output RRM is setting? If you manually set power to max do you get a performance increase? We have both 3602i and 3602e series with dipoles you mention with no issues. We are running 7.2 code currently but plan to goto 7.5 later this summer. -Jimmy University of Michigan ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
