The original DCA algorithm prior to 6.0 code was problematic if you had a lots of APs. A change to a single AP could result in a cascade change to the rest of the radios in the same RF neighborhood. This could happen within a building, or if AP's in adjacent building could see each other, even campus wide.
A lot of changes were made in 6.0 and beyond to minimize the problems. There is a hop limit on adjacent APs that will change, and changes are no longer based on the single worst radio. In theory, the defaults as they are today in 7.x code should work pretty well now.
Jeff
>>> On Thursday, October 03, 2013 at 11:06 AM, in message <of9304ac17.74c680d4-on87257bf9.0063110d-87257bf9.00637...@mtroyal.ca>, Craig Eyre <ce...@mtroyal.ca> wrote:
|
- Cisco WLC dynamic channel assignment (DCA) interval Mark Duling
- Re: [WIRELESS-LAN] Cisco WLC dynamic channel assignme... nphay
- Re: [WIRELESS-LAN] Cisco WLC dynamic channel assignme... Craig Eyre
- Re: [WIRELESS-LAN] Cisco WLC dynamic channel assi... Jeffrey Sessler
- RE: [WIRELESS-LAN] Cisco WLC dynamic channel assignme... Sullivan, Don
- Re: [WIRELESS-LAN] Cisco WLC dynamic channel assi... Dennis Xu
- RE: [WIRELESS-LAN] Cisco WLC dynamic channel ... Sullivan, Don
- RE: [WIRELESS-LAN] Cisco WLC dynamic chan... Kent Cummings
- Re: [WIRELESS-LAN] Cisco WLC dynamic... Walter Reynolds