Yeah my understanding is that as per the standard devices are 
required(mandatory) to support 6,12,24 rates for 802.11g. So to ensure all 
devices are happy then 24 would be the right minimum, therefore you may see 
some weird behaviour.  So devices need to support that to be compliant, I'm not 
sure it means you have to use it. I'd say if your running 54 and there's no 
complaints.... why change.  it will be interesting to see how things go. 


We disabled 802.11b rates about 3 months back with no issues reported. We've 
left it enabled in some of our remote campuses where we use lower rates to get 
distance. 



--
Jason Cook
Technology Services
The University of Adelaide, AUSTRALIA 5005
Ph    : +61 8 8313 4800

-----Original Message-----
From: The EDUCAUSE Wireless Issues Constituent Group Listserv 
[mailto:[email protected]] On Behalf Of Chuck Enfield
Sent: Tuesday, 21 June 2016 6:21 AM
To: [email protected]
Subject: Re: [WIRELESS-LAN] 802.11b data rates disabled?

Rick,

If I were brave enough to do what you've done, here's what I would worry
about:

- 802.11a/g devices are getting scarce, but I've heard rumors that there were 
802.11g devices that required a basic rate of 6, 12, or 24 Mb/s.
It's possible that there are no such devices left, that driver updates have 
eliminated the limitation, or that no such devices ever existed.
- Many client device drivers do unexpected things when connected to networks 
with unconventional settings.  For example, will clients with a marginal MCS 7 
connection probe for their next AP before their retry rate goes through the 
roof?
- We use 40Mhz channels, so reliable comm at MCS 7 requires about 28 dB SNR.  
It could be very difficult to maintain that while moving.
- Even if clients roam successfully, you'll see an increase in roaming 
activity.  Moving clients may normally hit every second or third AP along the 
way, in your case they'll probably hit every AP.  This could increase the 
overhead consumed by authentication and/or stress your AAA infrastructure.  
That said, the AAA load could be more than offset by reduced authentication 
attempts to indoor APs from outdoor passers-by.

I'm not suggesting these are reasons not to do it.  They're just things I'd 
worry about.  I'd be interested in hearing how it works out for you if you find 
the time to follow up.  

Thanks,

Chuck

-----Original Message-----
From: The EDUCAUSE Wireless Issues Constituent Group Listserv 
[mailto:[email protected]] On Behalf Of Rick.Decaro
Sent: Monday, June 20, 2016 2:10 PM
To: [email protected]
Subject: Re: [WIRELESS-LAN] 802.11b data rates disabled?

It sound like a lot of people have already disabled the 802.11b data
rates.   That being said....what minimum rate is everyone using?  

We just changed ours last week from a minimum of 1Mbps to 54Mbps.   So far
we have not heard of any issues.    Does anyone know what if any problems
could arise from this being set to 54Mbps?   Is there a sweet spot in
between that is better?     

Thanks,

Rick DeCaro
(636)230-1911
[email protected]


-----Original Message-----
From: The EDUCAUSE Wireless Issues Constituent Group Listserv 
[mailto:[email protected]] On Behalf Of Watters, John
Sent: Monday, June 20, 2016 1:01 PM
To: [email protected]
Subject: Re: [WIRELESS-LAN] 802.11b data rates disabled?

We have had the b rates disabled for 2 months short of 5 years. Not a single 
complaint that I am aware of.


-jcw    
        
John Watters    The University of Alabama
        Office of Information Technology
        205-348-3992
 


-----Original Message-----
From: The EDUCAUSE Wireless Issues Constituent Group Listserv 
[mailto:[email protected]] On Behalf Of Todd M. Hall
Sent: Monday, June 20, 2016 10:50 AM
To: [email protected]
Subject: [WIRELESS-LAN] 802.11b data rates disabled?

Do you have all of the 802.11b data rates disabled?  If so, how long have they 
been disabled?  Did you have many complaints when you disabled them?
Were there any particular devices that could not connect as a result?

I'm hoping this information will help us move towards disabling these old 
rates. 
Thank you for your feedback.

--
Todd M. Hall
Sr. Network Analyst
Information Technology Services
Mississippi State University
[email protected]
662-325-9311 (phone)

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/groups/.

Reply via email to