> Date: Mon, 11 Sep 2017 17:48:58 -0700 > From: Mark Duling <[email protected]> > Subject: Re: spurious cpi report of mass AP disassociation > > Thanks for all the replies everyone. Well I'm not used to looking at AP > logs, but ...
After such an event, log into the controller and run 'show ap summary' the list of APs shows up in the order that the APs joined the controller so the ones at the end of the list are the newest ones to join. Pick one of the bottom of the list and run 'show ap config general <APname>' and look for the join info near the bottom eg: > AP Up Time......................... 1 days, 21 h 15 m 05 s > AP LWAPP Up Time................... 1 days, 21 h 13 m 10 s > Join Date and Time................. Wed Sep 13 16:03:59 2017 > Join Taken Time.................... 0 days, 00 h 01 m 54 s Is the APs dropped and joined, then it will be evident from the Join Time. If the AP rebooted, then it will be evident from the AP Up Time. If neither, then you had a false alarm from Prime. -- Earl Barfield -- Academic & Research Tech / Information Technology Georgia Institute of Technology, Atlanta Georgia, 30332 Internet: [email protected] [email protected] ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss.
