Don't forget that interference flows both ways; as I understand it, 802.15.4 is 
much lower power than 802.11 and may get overwhelmed by the much "louder" 
802.11 signals. As we all know, 2.4 GHz is already a wasteland of noise, so 
that will make it even worse.

IIRC, however, there are a couple of channels in 802.15.4 that fall between 
802.11 channels 1,6, & 11. We have a single instance of 802.15.4 for specialty 
door looks in one location (related to accessibility for special needs 
students) and we worked with the vendor to choose one of these channels. 
Doesn't seem to cause interference, but we don't have a wide spread deployment 
like this would be.

What is it with vendors wanting to use 2.4 for everything? The 900MHz band is 
part of the 802.15.4 standard and should theoretically have longer range to 
boot.

Thomas Carter
Network & Operations Manager / IT
Austin College
900 North Grand Avenue
Sherman, TX 75090
Phone: 903-813-2564
www.austincollege.edu<http://www.austincollege.edu/>

From: The EDUCAUSE Wireless Issues Constituent Group Listserv 
<[email protected]> On Behalf Of Manuel Amaral
Sent: Tuesday, April 3, 2018 1:46 PM
To: [email protected]
Subject: [WIRELESS-LAN] Anyone have experience with wireless lighting and 
contol systems?

Our facilities department is looking to upgrade some of our lighting 
infrastructure to use lower power LED light fixtures.  One of the proposals is 
to replace all the lighting and the existing Lutron lighting control system 
with a relatively new Eaton WaveLinx wireless lighting system.

Unfortunately, the vendors who came in couldn't even explain what spectrum(s) 
the infrastructure would run on.  A quick review indicates that the controllers 
operate on WiFi or wired LAN for control access and 802.15.4 for communication 
(@ 2.4MHz) between all the various devices (dimmers, switches, occupancy 
sensors, lights, etc).  Each controller currently operates as a standalone 
since they still don't have a centralized management environment and they're 
single user access only.

We're particularly concerned about any potential interference issues that might 
arise within our existing and future wireless environments.  I was wondering 
whether anyone has any familiarity with this or similar environments and 
whether you'd be willing to share your thoughts and experiences on them.


Regards,
Manny
-----------------------
Manuel (Manny) Amaral
Director, Information Technology Operations
781-292-2433 | www.olin.edu<http://www.olin.edu>

[Olin_Identifier_Gradient_Standard_Blue_RGB]

Leading the Revolution in Engineering Education
twitter<twitter.com/olincollege> | 
facebook<https://www.facebook.com/FWOlinCollege> | 
youtube<http://www.youtube.com/user/FranklinWOlinCollege>

We will never ask you for your password!


********** Participation and subscription information for this EDUCAUSE 
Constituent Group discussion list can be found at 
http://www.educause.edu/discuss.

**********
Participation and subscription information for this EDUCAUSE Constituent Group 
discussion list can be found at http://www.educause.edu/discuss.

Reply via email to