Sam, Out of the roughly 400 2802 we have, 2 have failed due to experiencing boot room image checksum failures. The symptoms show up after a power cycle, AP draws power but status led stays off. If you console the AP you get nothing. Cisco has bug id CSCvf47017 in reference to this problem.
On Thu, Aug 16, 2018, 10:39 Sam Ziadeh <[email protected]> wrote: > Is anyone else seeing a high rate of Cisco AP 2800 failures? Out of a > batch of ~500 recently installed Aps, we have had roughly 70 fail. Some > were online for a month, but some only a few days. > > Typically they will fail after a powercycle or loss of power. > We are working with Cisco on this, but I’m curious if this is a more wide > spread problem. > > > > ------------------------------------------------------------- > > Sam Ziadeh > > Manager, Network Engineering & Architecture > > University Networking & Infrastructure > > Information Technology Services > > Louisiana State University > > (225) 578-0074 > > [email protected] > > > ********** Participation and subscription information for this EDUCAUSE > Constituent Group discussion list can be found at > http://www.educause.edu/discuss. > > ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss.
