Try setting "DHCP primary port" to ethernet in the WAP11 USB-software (if you're trying to connect over the ethernet-port). Don't select DHCP-enable unless you actually use this.
Regards, Stig ----- Original Message ----- From: "Adrian Brinton" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, May 20, 2002 6:39 PM Subject: [BAWUG] WAP11-SNMP Config tool not working > Hello all- > > I've got a Linksys WAP11 which I recently upgraded to firmware 1.4i.1, and > the USB & SNMP Tools version 1.7d.2.9. The USB tool works fine, but I can't > get the SNMP tool to work! I can ping the WAP11, and the wireless LAN works > fine. > > Here's what I've tried so far: > Using both Win2k & WinXP > Setting a new IP in the WAP11 > Setting IP back to default for the unit > Resetting the Read only & Read/Write passwords > Using SNMPmanager V1.7.4.3 from Atmel > Connecting via wireless and ethernet > Ethernet with crossover > hmmm, anything else? > > Strange things: > If I connect with the correct read/write string, I get "Access Point not > found" with both the Linksys tool and the Atmel tool. > > If I connect with an incorrect password, the Linksys tool gives me "Not an > authorized Password. Please check." and the Atmel tool gives me "802.11 AP > (Ver. 1.4i.1) <SSID> found" then "You are not an authorized user. Check your > community name". > > Anyway, I've changed the community strings with no successful results. If > anyone has seen this or can give me any idea what could be happening, I > would appreciate it!! > > Adrian Brinton > > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
