I would ask your radio manufacture. See how the receivers will desensitize with the TPO and spacing that you will be doing. BTW... worst case you could find you have damaged the receivers.
Tim On Sun, Nov 03, 2002 at 06:48:34PM +0100, Eden Akhavi wrote: > Thanks for your response, from our discussions with our antenna > manufacturer they seem to be under the impression that if we configure > two radios on non-overlapping channels this should be fine. > > I am waiting for the splitters to arrive, so as soon as I have tested it > I'll let you know. > > > Likely, best case, you will get some desensitization of the receivers > > of the radios. Typically one would use isolators or filters to > > keep the radios out of each others hair. > > > > You may think about putting up separate antennas for each radio and > > insuring that they are out of each other's beam-width. > > > > Tim -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
