You might be interested in this from the FAQ atThanks for your response, from our discussions with our antenna manufacturer they seem to be under the impression that if we configure two radios on non-overlapping channels this should be fine.
http://www.telexwireless.com/wlanfaq.htm..:
Q10: Can I use 2 radios with one antenna?
A: The simple answer is NO. If you plan to use amplifiers, then there is absolutely no way to do this without causing major problems and greatly reducing the throughput. The amplifier switches from receive to transmit upon detection of the transmit carrier from one radio. The two radios would have to be synchronized, both transmitting and receiving at the same time. Without an amplifier, it might be possible if DSSS channels 1 & 11 were used along with a high-isolation splitter, a low VSWR antenna and low ( less than 30 mW) transmit power levels.
--
general wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
