Hi, Following on from the questions I asked a week back - I have done some basic testing today connecting two radios to a single antenna. The primary objective was to enable us to increase the number of channels available on a sector antenna rather than deploying a second antenna.
I used Huber & Suhner 3 way Power Divider, connected an AP2000 with two radios (1 on channel 1, the other on channel 10) - the antenna used was an H&S 85 degree sector antenna. It appeared to perform flawlessly - the number of errors did not increase on either of the radios, neither did the signal or noise level change. I'll do some proper testing over the coming days and if anyone is interested I will post the results. Our biggest headache is increasing the number of antennas on a mast, if we can make this work properly it will allow us to increase the number of clients on a single antenna by spreading them over different channels. If anyone else has tried this please let me know - I'd like to compare notes. Regards Eden -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
