I did a lot of googling arround trying to find more info and more expamples to configure traffic shaping on Linux RedHat8.0 server. Problem that I have is that neighbouring office that pays for 25% of our SDSL bill hogs 75% of bandwidth and I am using IconnectHere VoIP. I have WAP11 serving our floor so there is no way to traffic shape with that unit. With extremely tight budget I would like to find something open source (heavenly if it would be GUI). My net diagram is WAN---eth0 on server eth1--- switch ----- WAP11 ----- clients
Any suggestions would be great! BTW, I am using CBQ.INIT with folowing config, but it does not seem to do its job: DEVICE=eth1,100Mbit,10Mbit RATE=500Kbit WEIGHT=50Kbit PRIO=5 RULE=:1755,192.168.100.0/24 RULE=:554,192.168.100.0/24 RULE=:7070,192.169.100.0/24 RULE=:6699,192.168.100.0/24 RULE=:6700,192.168.100.0/24 RULE=:41000,192.168.100.0/24 RULE=:41001,192.168.100.0/24 RULE=:41030,192.168.100.0/24 RULE=:1080,192.168.100.0/24 DEVICE=eth0,100Mbit,10Mbit RATE=200Kbit WEIGHT=20Kbit PRIO=1 RULE=,192.168.100.119 RULE=:5060 RULE=:20000 DEVICE=eth1,100Mbit,10Mbit RATE=200Kbit WEIGHT=20Kbit PRIO=1 RULE=,192.168.100.119 RULE=:5060 RULE=:20000 -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
