I did sh script to do the same. And just inject the result to rrd tool. I didn't try to convert the % value to exact values cause I just need to monitor both values Signal and noise .. and I don't care about the exact dbi values.
Sincerely -bino- ----- Original Message ----- From: "Peter Rozental" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 10, 2003 9:09 AM Subject: [BAWUG] Get client snr levels from AP-1000 > I am trying to read the snr levels of remote clients connected to an > AP-1000. I wrote a perl script to snmp walk the AP and get the MAC, > Station Name, and a value that is not in dbi units. The number that I > get is the same number that shows up when you do a link test using the > Orinoco SNMP utility (Some percentage). Does anyone know how I can use > that value and convert it to dbi rather than a percentage??? I noticed > that the dbi value is roughly half of percentage value...very rough. Any > advice would be great. > > Thanks > > Peter Rozental > > > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
