This sounds HOPE to me. Only where can I find 200mW 802.11b gears. I made it to a 2km link using WAP11 v2.6 of linksys at 2mbps. BUt sometimes it hangs normal for this product. But my task is on a 10 mile link. Line of sight situation is really not that stiff. along the way there is no obtrcution of any kind. But near the remote site it is partially being covered by this 10 floor building.
I can give it a try with a more powerful radio like what you recommend 200mW . My WAP11 v2.6 are only giving out 35mW paired with 15db omni on each end. Can you point me to sites where I can read about them specs and price. I have at hand a pair of 24dbi Parabolic dish from hyperlink. guess I want to give it a try. Power issue is not a really a concern here in my side. I can even use amps with out having problem with the big guys. tnx, George O2Runsystems ----- Original Message ----- From: "Casey Halverson" <[EMAIL PROTECTED]> To: "George" <[EMAIL PROTECTED]>; "802.11B NEWS GROUP" <[EMAIL PROTECTED]> Sent: Thursday, July 24, 2003 12:40 PM Subject: RE: [BAWUG] 802.11b Long Range non line of sight "NLOS" (i really hate that acronym) can be done with 802.11b gear, but its mainly a hit or miss. For example, I had about a 10 mile path, 2 miles of which were solid tree/urban clutter/housing/etc. all of that garbage caused about 30dB of attenuation, but I had plenty of signal left over to make a link with a reasonable fade margin. This is a story of a link that probably shouldnt have even worked that did. Next example, on a 2 mile shot, i cannot get through 30-50 feet of my apt with 24dBi parabolics and 200mW radios. Here is a sad story of not being able to make it through obstructions, no matter how little or insignificant i thought they were. It all depends on the materials in the path. Since we do not all possess magical powers to determine path content, its hit and miss. We could paper link this path to death, or you could find someone with some gear and try it yourself. Two 24dBi parabolics and a pair of 200mW radios are your best shot if you want to use 802.11b. -----Original Message----- From: George [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 11:16 AM To: 802.11B NEWS GROUP Subject: [BAWUG] 802.11b Long Range non line of sight Importance: High Hi guys, I was wondering if anyone had came across with an 802.11b equipment that doesnt need clear line of sight. I am tasked of bridging a link for a10mile remote site. But Line Of sight is not very clear. Can anyone please suggest what can i possibly do to accomplish this. thanks in advance George -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
