George writes:
> This sounds HOPE to me. Only where can I find 200mW 802.11b gears.
> I made it to a 2km link using WAP11 v2.6 of linksys at 2mbps. BUt
> sometimes it hangs normal for this product. But my task is on a 10
> mile link. Line of sight situation is really not that stiff. along
> the way there is no obtrcution of any kind. But near the remote site
> it is partially being covered by this 10 floor building.
>
> I can give it a try with a more powerful radio like what you
> recommend 200mW . My WAP11 v2.6 are only giving out 35mW paired with
> 15db omni on each end. Can you point me to sites where I can read about
> them specs and price.
>
> I have at hand a pair of 24dbi Parabolic dish from hyperlink. guess I
> want to give it a try. Power issue is not a really a concern here in
> my side. I can even use amps with out having problem with the big
> guys.
Antenna gain is better than Amps (it works both ways!) rx sensitivity
is as important as tx power.
My company sells 200mW gear, including bridges.
Jmi
--
"Speed, it seems to me, provides the one genuinely modern pleasure."
-- Aldous Huxley (1894 - 1963)
--
general wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
