You can use a 350 AP and a 350 WBR to bridge 2 lans. This is with the AP in AP mode and the bridge acting like a client that proxy arps (I think used proxy arp, can't remember). The AP will has options for client and repeater modes but in both of these modes it will not forward packets to the wired interface. This is so Cisco can sell more gear and so people buy their bridges instead (not to be confused with the Workgroup bridges). The bridges only talk to other bridges and cost alot more. There's also rumors of the window sizes adjusted so long range links can not be achieved using the AP's but I'm sending this email via a link that is 3.9 miles using a 340 AP and a LMC-352 card in a FBSD machine and I know of longer ones that work just fine too.
Dan. On Wed, Sep 03, 2003 at 02:46:00PM -0700, Greg DesBrisay wrote: > > No (but a Cisco Aironet 350 Bridge can be used as an access point!). > > > On Thu, 2003-08-21 at 17:36, Loren Zemenick wrote: > > Does anyone know if the AP can be used in bridge mode? > > I have a Cisco Aironet 350 (model AIR-AP352E2R-A-K9) and want to connect two > > LANs with a wireless link. Can it be used as a bridge with any of the other > > Aironet 350 models such as another access point (model AIR-AP352E2R-A-K9), > > workgroup bridge (model AIR-WGB352R), or wireless bridge (AIR-BR350-A-K9)? > > > > Thanks, > > Loren > > > > -- > > general wireless list, a bawug thing <http://www.bawug.org/> > > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
