Don't recall enough about the PacWireless parabolic to answer your question without having it in front of me, but I do have a crimper that you're welcome to stop by and use (I'm in San Carlos). Please contact me off-list to make arrangements!
When you order your connectors be sure to get the EZ-style connectors from Times Microwave with the captive center pins (e.g. EZ-240-NM)! These will save you hours of effort and will give you a far more reliable connector to boot. Greg DesBrisay On Fri, 2003-10-24 at 17:47, Leigh L. Klotz, Jr. wrote: > I'm looking for someone with experience with this setup, and possibly with a > crimping tool and a bit of spare kindness. > > I've ordered a PAWDC-24 die-cast aluminum parabolic from PacWireless > (http://www.pacwireless.com/PAWDCA-24.pdf) and because of the > element I'm using, it has only an N Female connector on it. The sales engineer told > me that LMR-400 with an N Male will not fit > through the reflector and I need to use an LMR-240 pigtail. > > Does anyone have experience with this setup and know whether I have to attach the > connectors to the pigtail after I thread the > LMR-240 through the reflector, or if the LMR-240 N connector will fit through it and > I can just buy a 2' pigtail pre-made? And if I > do have to attach the connectors myself, is there anybody in the Palo Alto area who > would be so kind enough to let me drop by with > some parts and crimp it together? > > Thanks, > Leigh. > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
