Unless all of your grounds are bonded together - You stand the risk of
causing your own nightmares due to the difference in potential across the 2
different grounding systems. Make sure everything is bonded together as 1
single grounding system.
JohnnyO
----- Original Message -----
From: "Dan Metcalf" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <[email protected]>
Sent: Tuesday, August 02, 2005 3:24 PM
Subject: [WISPA] Grounding questions/help
I have several towers, all of which except for 1 never have any issues,
however,
this 1 tower (we are the only tenant) seems to have a problem each year
during
lightning season...
Last night it took a hit, although it appears it came through the electrical
and
not the tower, but I’m not sure, the UPS was off, I reset it and it came
back
online --- but the POE injector did NOT, it was completely shot.
Replaced the POE unit and the wireless gear came online, but started
rebooting
after about 15minutes (although it didn't this before, I just changed the
POE
from a 12v to 15v) tried a 24v POE, and the radio was still rebooting...
Called
the tower climber..
Anyways I looked over the ground and the tower appears to 3 ground rod off
each
tower leg and then the building has a separate ground rod - (unless its
connected underground)
Any thoughts?
Thanks
Dan
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 07/28/2005
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
