FS/BLM??????

A. Huppenthal wrote:

Any comments on freestanding towers? Apparently the FS/BLM want all new towers to be free standing in many areas.

Brian Rohrbacher wrote:

I won't skip, but I don't want to waste. I want to do it exactly what is needs to be, well, if it's suppose to be a 48 inch hole, I'd do 49. But I don't want to have to do 5 ft. I want to figure enough for the job without wasting material and time. Believe me, I want efficiency, not corner cutting.

JohnnyO wrote:

CPE - PLUS a climber while it's being installed - Don't skimp Brian - I prob do more things out of specs then most - but that is b/c I add overkill into our tower bases.... JohnnyO

    -----Original Message-----
    *From:* [EMAIL PROTECTED]
    [mailto:[EMAIL PROTECTED] *On Behalf Of *Brian Rohrbacher
    *Sent:* Monday, August 22, 2005 9:47 AM
    *To:* WISPA General List
    *Subject:* Re: [WISPA] Rohn BX Tower

    I know.  On one hand I want it good enough for a CPE, but on the
    other hand I don't want to hear on the news 20 years from now
    that it crashed over and killed a guy when he wanted to put his
    VW Bug on top of it.  I want to build it to take whatever people
    want to put on it.

    Scott Reed wrote:

    Only a CPE today, but towers always beg for more equipment.
    Don't skimp, you never know what you will want/need in the future.

    Scott Reed
    Owner
    NewWays
    Wireless Networking
    Network Design, Installation and Administration
    www.nwwnet.net <http://www.nwwnet.net/>

    *---------- Original Message -----------*
    From: Brian Rohrbacher <[EMAIL PROTECTED]>
    To: WISPA General List <wireless@wispa.org>
    Sent: Mon, 22 Aug 2005 08:34:03 -0400
    Subject: Re: [WISPA] Rohn BX Tower

> Portland cement has no gravel. I'll mix it 4 parts to one. So.....those 15 94 lb bags are like 60 94 lb bags. I had
    figured I needed 1.28 yards for the hole I dug.  But now that I
    have the specs I will see how big the hole has to be.  I will
    only put a CPE on this tower.  Nothing huge.
    >
    > Brian
    >
    > Mark Koskenmaki wrote:

15 bags of cement won't mean squat in a hole that
big.









North East Oregon Fastnet, LLC
509-593-4061

personal correspondence to:  mark at neofast dot
net

sales inquiries to:  purchasing at neofast dot
net

Fast Internet, NO
WIRES!

----------------------------------------------------------------------------

-

----- Original Message -----


From: "Brian Rohrbacher" <[EMAIL PROTECTED]>
To: <wireless@wispa.org>
Sent: Sunday, August 21, 2005 7:21 PM
Subject: [WISPA] Rohn BX Tower

I dug a hole 32 inch square by 42 inches deep yesterday for a
rohn
bx

tower.  It is 5 sections of 8 ft.  I just got 15 bags of portland
cement


and will add my own
gravel.

I was thinking about three 1 1/2 inch pieces of pipe stuck in
the
concrete


to bolt the tower legs to.  I
will

thread and put couplers on the pipe at 22 inches so they can't
move. I've


got some re-bar to chuck down in the hole
too.

I've got 3 8ft ground rods and will bond with #4 bare stranded
wire. I


picked up a load of grade 8
bolts,

washers, and lock washers for bolting the tower together and to
the
pipe


stubs.  Anyone have any
suggestions

for me?  This is my first tower.  I will pour tomorrow
afternoon.



brian





--



WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



    *------- End of Original Message -------*

------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005
------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005



--
Blair Davis

AOL IM Screen Name --  Theory240

West Michigan Wireless ISP
269-686-8648

A division of:
Camp Communication Services, INC

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to