Re: [WISPA] Senao Question

[Brian Rohrbacher]

This is why I was asking more about pricing.  I use these http://www.demarctech.com/store/catalog/product_info.php?cPath=21_24_38&products_id=147&osCsid=24262290b45598f284b297f1cd496d87 and I buy them at $194 each.  They come with mounting hardware, POE, ethernet lightning protection and integrated ready to "hang".  I am always looking for something else, but I always end up determining Demarc is the best.  So, for a 250mw radio with 15 DBi antenna, I don't see anything better out there.  I really like the BW limiting at the CPE.  This is where upload is suppose to be limited. Brian Richard Strittmatter wrote: Hrm. $145.18 I am paying around $160 for the Tranzeo CPE200-15 in qty 20 pricing. Couple things that are missing from your quote is the assembly time, and the POE injector. One of the reasons we use the tranzeo's over the CB3 is assembly time on the roof, and external cable connection, external led's, and since they are just a CB3 with custom firmware, they work just as well. Their poe also has a ground drain wire ( notice I'm not saying surge supressor here.. ) R -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Pete Davis. NoDial.net Sent: Wednesday, October 26, 2005 9:41 PM To: WISPA General List Subject: Re: [WISPA] Senao Question All prices from wisp-router.com. You may find better prices elsewhere, but Eje's usually seem to be in line. 2611 CB3 Deluxe = $94.83 (qty 24) PacWireless Rootenna = RT24-14 = $36.90 (qty 25) UML (Satellite Arm) = $13.45 A 3 inch piece of Velcro tape holds in in just fine. They seem to handle 100 degree + days in South Texas without any problem. I don't think I have had any fail due to heat or cold. It got down to the teens last winter. Pete Davis NoDial.net Brian Rohrbacher wrote: Pete, Will you list out all the parts and prices of this 200mw CPE? Is this outdoor, POE? It is kind a "build your own"? What temperatures is this operation in? Brian George wrote: Pete Davis. NoDial.net wrote: I like the features of the Tranzeos, the Smartbridges, etc etc, but at $100 more per CPE, my 200 2611 clients would have cost me $20k more. If anyone can tell me another way to get a 36db POE client for less than $150 PLEASE contact me off list to [EMAIL PROTECTED]. I learned that the hard way. Pete Davis NoDial.net Well I would say that Teletronics EZ Bridges were good. I have 500 +/- of them. And they have a 200MW version. But lately, I've been getting some bad ones in my orders. The 100mw pcb kit is 100.00 or so and the 200mw is 125.00 or so. But I would caution buyer beware, since buying the pcb only version and not the full fledges outdoor unit, I've noticed a lot of doa''s and unstable units. Will be nice when StarVX Lonnie gets his single radio cpe. I understand it may be in the price range you mentioned. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/