Hello Brett, Usually it is: 1Watt max power freq. Hopping- no channel setting ability Make sure they are not using an antenna larger then 6db or an omni. FCC regs limit antenna size if using 1 watt power output.
Best thing is polarity switch and then see if you can put a load in the rf cable to reduce power. And tilt their antenna down to help reduce power radiated. Course that assumes the DPW will work with you. On link we had their office died so it was easier to let them decide to let us "fix" their network. Barry Thursday, December 29, 2005, 4:12:27 PM, you wrote: BH> I have a water tower near one of my 900Mhz ap's that's BH> causing me a lot of interference due to the water company's SCADA BH> stuff. Does anyone know if the devices they use have channel BH> control in terms of switching channels within 900Mhz or are they BH> all over the place all the time. I have a sense the water BH> company might do some channel management with me, but I wanted to BH> know if their equipment had that capability before I made the BH> enquiry. -- Best regards, Barry mailto:[EMAIL PROTECTED] -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
