But then you need AC up the tower right?
Or how do you do it?
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message -----
From: "Frank" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <[email protected]>
Sent: Monday, February 20, 2006 12:42 PM
Subject: RE: [WISPA] Ethernet Opto Isolator
For this, I've normally used an Ethernet fiber converter. Cat5 -> Fiber on
the tower and Fiber -> Cat5 down below.
These are "standard" 10/100 megabit Ethernet converters readily available
from networking supply houses.
Frank Keeney
Pasadena Networks, LLC
Antennas, Cables and Equipment:
http://www.wlanparts.com
-----Original Message-----
On Behalf Of Jason Wallace
Does anyone know of a good isolator for cat5? I want to really protect
my network from a tower mounted radio.
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
