On a side note, we have had much higher results per sector using Trango for VOIP (before any VOIP enhancement.).

Unfortuneately we don't have concrete real world data to report, but its pretty high.
We are doing more detailed tests probably in the next week or so.
(as soon as we get our VOIP server built)

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


----- Original Message ----- From: "Patrick Shoemaker" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Friday, June 16, 2006 6:43 PM
Subject: Re: [WISPA] OT: about 70Mbps for under $6K


http://motorola.canopywireless.com/fp/downlink.php?id=81af5294d462cbcbf93ee9f1ea2599fd

That moto whitepaper claims 26-28 calls per AP on the advantage platform using 50-50 up/down data ratio. Calls per AP drops to 13-18 when using 25-75 up/down ratio.
Patrick

Jon Langeler wrote:
Patrick, my string-and-can wifi asterisk ap does more than 10 calls! :-) Honestly, 288 G711 calls is probably more towards the high end. Whether you would like to realize it or not, canopy has come a ways over the years. If you consult with your engineers I'm sure you'll conclude that a Canopy AP/SU(14Mbps aggregate) could do a LOT more than 10 calls...

Jon Langeler
Michwave Tech.

Patrick Leary wrote:

As a non engineer, this is the first I have ever of this as an issue and I have never heard it from customers, very large or very small. Is this a real issue (I have already passed the comments to our PLMs for the product line) for operators? I do know that with firmware version 4.0 these radios support
QinQ VLAN, which I've not heard other UL radios supporting. And one VL
sector with 4.0 will support 288 concurrent VoIP calls (VoIP only play,
20MHz channel). That compares to 8-10 per Canopy sector and maybe 20 on a
Trango sector.
Patrick
-----Original Message-----
From: Tom DeReggi [mailto:[EMAIL PROTECTED] Sent: Thursday, June 15, 2006 1:33 PM
To: WISPA General List
Subject: Re: [WISPA] OT: about 70Mbps for under $6K

Only 1512 also limits the use of many VPN technologies used to tunnel to partners, if offering wholesale transport services. For example, IPSEC. Microtik allowed us to get over the 1512 limit, as long

as we were using WDS. Trango of course allowed the 1600, one of the reasons that we chose it 5 years ago. Any plans that Alvarion will make mods to allow larger packets? I'd support Matt's comment, that limited to a 1512 MTU could severally limit

its viable use for service providers, allthough Corporate clients likely could care less, as they'd just design around it, since it was for their own

network.

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


----- Original Message ----- From: "Matt Liotta" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Thursday, June 15, 2006 10:43 AM
Subject: Re: [WISPA] OT: about 70Mbps for under $6K



Our setup requires the following:

1500 bytes for payload
4 bytes for VLANs
4 bytes for LDP
4 bytes for EoMPLS header
18 bytes for Ethernet header

That means we need an MTU of at least 1530. I only specified 1532 since that is what Canopy and Orthogon use (Trango supports 1600). Unless 1512 is your payload size, not your frame size your radios can't be used to backhaul an MPLS network.

-Matt

Patrick Leary wrote:


Matt,

I just got the reply to your question: the maximum packet size is 1512.

Patrick Leary
AVP Marketing
Alvarion, Inc.
o: 650.314.2628
c: 760.580.0080
Vonage: 650.641.1243

-----Original Message-----
From: Matt Liotta [mailto:[EMAIL PROTECTED] Sent: Thursday, June 15, 2006 6:33 AM
To: WISPA General List
Subject: Re: [WISPA] OT: about 70Mbps for under $6K

Does it support MTUs greater than 1500? More specifically, we are looking for an MTU of 1532.

-Matt

Patrick Leary wrote:



Okay, be forewarned that so this is a shameless plug, but the data from


beta


testers of our new B100 OFDM point-to-point is worth sharing. In the Texas panhandle one company is getting 62Mbps at 16 miles. In the Big Easy, a


link


is getting 80Mbps, but it is only a one mile shot. One guy in Nebraska told me Tuesday that the B series of radios (B14, B28, and B100) are about the most simple he has ever used (his WISP has been operational since 2001).

The BreezeNET B100 was just announced as a commercial product. Like all B
series, the price includes the antennas when the integrated version


(antenna


built-in) is bought. A full link has a retail of $7,990. Your typical
discounts apply as well. And remember, since this is OFDM the B achieves some good NLOS performance in terms of building obstructions and sharp
terrain.

We are pretty excited about this radio as a top choice for WISP backhaul.


It


is targeted as a high capacity, high quality, and really simple to install
backhaul for a very moderate price.

Those of you wanting more info, just drop me an e-mail.

Patrick




--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/





--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to