I don't know how high off the roof it would take to not have bad multipath
issues. I do know that I had a CPE on one end of a metal building that was
longer than a football field & twice as wide(was shooting over the length of
it) and I "the Devil" trying to correct that issue while it was in that
position. I was about 5' off the roof on a custom made roof mount. I had to
get out to the side of that puppy to get rid of the issues associated with
the roof. I think as it got hotter and the heat waves rolled off the roof
the worse it got!

GL,

Mac Dearman

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ryan Spott
Sent: Thursday, June 29, 2006 3:44 PM
To: WISPA General List
Subject: [WISPA] Height above metal roof

I have been offered the roof of a barn in my area to mount 900, 2.4 and
5.8 APs.

What is the minimum height above the metal that I want to be at if I
were to mount omnis?

I figured you folks would know with all the talk of metal water towers
and metal silos.

Thanks!

ryan

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to