Ethernet port acting up ? As in connecting / disconnecting ? Make sure you have it set for "long cable", if that doesn't work - disable auto-negotiation and try 100mbps half duplex, if that don't work - 10mbps full duplex and then last try 10mbps HALF duplex......
JohnnyO x -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Tuesday, September 12, 2006 7:56 AM To: WISPA General List Subject: Re: [WISPA] MT power supplies It's actually the ethernet port acting up. Thought maybe it was lack of power. Mac Dearman wrote: > I don't think a RB532 will run 2 SR5's with a 2' patch cable and a >48VDC power supply without s0me weirdness happening. I only put one >Super Range card in a RB532 and one Atheros or Prism card. > >Mac > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Brian Rohrbacher >Sent: Monday, September 11, 2006 11:29 PM >To: Conversations over a new WISP Trade Organization >Subject: [WISPA] MT power supplies > >I have a RB 532 on 300 foot of cat 5 with 2 sr5. >I'm using poe 48v .700a power supply. >I'm seeing weirdness. > >Do I have enough "juice" > >Brian > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
