|
Thanks Jeremy. Wrong locations was the problem.
Now I just have to figure out how to use this. Are there templates for RouterOS? Scott Reed Owner NewWays Wireless Networking Network Design, Installation and Administration www.nwwnet.net ---------- Original Message ----------- From: Jeremy Davis <[EMAIL PROTECTED]> To: WISPA General List <[email protected]> Sent: Mon, 16 Oct 2006 10:47:58 -0400 Subject: Re: [WISPA] Loading freetype for cacti > Scott Reed wrote: > > I have tried to load freetype 2.1.10 and 2.2.1 so I can run cacti > > monitoring. Both versions appear to load just fine on my RedHat > > RHEL3.0 system, but rrdtool can't find it. Any suggestions? > Never had a similar problem before, but I would double check and see if > I had the development freetype package. If that didnt help I would > search for the freetype libraries on the box, if they are located in an > unconventional place I would add the directory to /etc/ld.so.conf, then > run the ldconf . > > Sincerely, > > Jeremy Davis > -- > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ ------- End of Original Message ------- |
-- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
