http://forums.cacti.net/about8855.html&highlight=mikrotik

On a related note, I have been having problems with cacti and RouterOS 2.9.20+ and getting interface statistics. The queries discover the interfaces without a problem but the traffic statistics are never gathered (all values are NaN). However the other SNMP values such as CPU, disk, uptime and wireless stats all work without a hitch.

Has anyone else experienced this?

   Sam Tetherow
   Sandhills Wireless

Scott Reed wrote:
Thanks Jeremy.  Wrong locations was the problem.
Now I just have to figure out how to use this.

Are there templates for RouterOS?

Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net <http://www.nwwnet.net/>


*---------- Original Message -----------*
From: Jeremy Davis <[EMAIL PROTECTED]>
To: WISPA General List <[email protected]>
Sent: Mon, 16 Oct 2006 10:47:58 -0400
Subject: Re: [WISPA] Loading freetype for cacti

> Scott Reed wrote:
> > I have tried to load freetype 2.1.10 and 2.2.1 so I can run cacti
> > monitoring.  Both versions appear to load just fine on my RedHat
> > RHEL3.0 system, but rrdtool can't find it.  Any suggestions?
> Never had a similar problem before, but I would double check and see if
> I had the development freetype package. If that didnt help I would
> search for the freetype libraries on the box, if they are located in an
> unconventional place I would add the directory to /etc/ld.so.conf, then
> run the ldconf .
>
> Sincerely,
>
> Jeremy Davis
> --
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
*------- End of Original Message -------*
!DSPAM:16,4533a970109908155416029! <http://mail.shwisp.net/spam/dspam.cgi?template=history&user=tetherow&retrain=spam&signatureID=16,4533a970109908155416029>


--
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to