John, The last I heard, it was an issue caused by running the boards on 48 vDC. I don't think it is a problem if you are running them on lower voltages. I have a partner WISP that was causing some problems on a fire department frequency. It caused a clicking noise in their radio transmissions. Backing off the power alleviated this problem.
Rick Harnish President Supernova Technologies, Inc. 260-827-2482 Founding Member of WISPA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Scrivner Sent: Saturday, December 02, 2006 12:49 PM To: [email protected] Subject: [WISPA] Any Status Updates? Just to be clear. When I stated that I had heard that the RB532 was causing some interference out of band I was not trying to discredit Mikrotik or their products. I had read the thread below earlier. That was what had led to my belief that this board was creating some out of band interference and had ongoing issues related to that. If anyone has more current information about validation of this problem or a remedy please feel free to share. Thanks, Scriv -------- Original Message -------- Subject: RE: [WISPA] RouterBoard 532s Date: Thu, 10 Aug 2006 23:08:33 -0400 From: Eric Rogers <[EMAIL PROTECTED]> Reply-To: WISPA General List <[email protected]> To: WISPA General List <[email protected]> Does anyone know if there is a resolution on this issue? If you browse Mikrotik's site, the thread has been removed. Eric -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Tetherow Sent: Thursday, July 13, 2006 6:18 PM To: WISPA General List Subject: Re: [WISPA] RouterBoard 532s Here is a thread from the MT forums on it. http://forum.mikrotik.com/viewtopic.php?t=9130 Sam Tetherow Sandhills Wireless Mac Dearman wrote: > Where did you get that info from Travis? Links, source...etc? > > Mac Dearman > > ------------------------------------------------------------------------ > > *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > *On Behalf Of *Travis Johnson > *Sent:* Thursday, July 13, 2006 3:58 PM > *To:* WISPA General List > *Subject:* Re: [WISPA] RouterBoard 532s > > Maybe they pulled them off production due to the NOISE they are > blowing all over the 50-450Mhz spectrum. :( > > Travis > Microserv > > Kelly Shaw wrote: > > Anyone know of a source with RouterBoard 532s in stock? > > I normally can get them from WispRouter but they won't respond to my > phone calls about them... > > Kelly Shaw > > Pure Internet > > www.pure.net <http://www.pure.net> > > > > __________ NOD32 1.1657 (20060713) Information __________ > > This message was checked by NOD32 antivirus system. > http://www.eset.com > > !DSPAM:16,44b6c32336811364511223! -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
