Never tried with a program, but link tests with 67/33 and hardware scheduling show 3.2Mbps down and 1.2Mbps up. On a mildly (30 Registered CPE) loaded AP we see 2.7Mbps down and 1.0Mbps up from various speed test sites. We have a OC-3 running about 60Mbps to the internet.
Mike Bushard, Jr Wisper Wireless Solutions, LLC 320-256-WISP (9477) 320-256-9478 Fax -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Wu Sent: Thursday, January 04, 2007 7:35 AM To: 'WISPA General List' Subject: RE: [WISPA] Canopy actual throughput Hi, those of you who use Canopy 900: what is the actual throughput you've gotten to the CPE? 4Mbps or less? Has anyone run a bandwidth test while passing traffic simultaneously in both directions (such as with Qcheck)? Thanks a lot. >>>>>>>>>>>>>>>>>>>>> If you have adequate SNR to be able to associate at the higher modulation (2X), then you will get an aggregate of 4 Mb Regarding up vs down, that depends on how you set your ratios in Canopy (it's allocated on a percentage basis) Qcheck is a horrible program for accurately checking bandwidth, I would recommend you look into something that actually works like Iperf -Charles ------------------------------------------- WiNOG Wireless Roadshows Coming to a City Near You http://www.winog.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mario Pommier Sent: Wednesday, January 03, 2007 2:36 PM To: WISPA General List Subject: [WISPA] Canopy actual throughput Mario -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
