They come with the standard u-bolts, but they will accommodate a 4" u-bolt
as well (at this point we are not offering a 4" u-bolt, but might in the
future if there is enough demand).  I think most measurements are based on
the outside diameter so the 2" galvanized pipe would work with our standard
u-bolt. 

Ben 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George Rogato
Sent: Thursday, January 04, 2007 11:41 AM
To: WISPA General List
Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion

Does this mount fit around a 2" galvi pipe?

I think a 2" galvi pipe has outside dimensions of 2 3/8"
Nt quite sure.

George

Marketing wrote:
> Sorry Mark. I should have explained in more detail.  
> 
> The 5200223 is the complete hardware kit with the heavy duty L-Bracket
> included.  This is setup to be used on the wire grids.  
> 
> The 5200224 is the complete hardware kit with the heavy duty L-Bracket
> included.  This is setup to be used on the die cast grids.
> 
> The L-Bracket can be purchased separately if you already have all of the
> hardware (U-Bolts, pipe clamps, screws, nuts, etc...).  
> 
> Let me know if there are any other questions.
> 
> Thanks,
> Ben Moore
> [EMAIL PROTECTED]
> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Mark Nash - Lists
> Sent: Thursday, January 04, 2007 9:58 AM
> To: WISPA General List
> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
> 
> ok, we're close... Help me out.  I'm not familiar with your grid antennas
at
> all, and therefore not familiar with your mounts, and I'm sure that others
> aren't as well.
> 
> You mentioned:
> 
>> 5600687 - L-Bracket Only
>> 5200223 - Wire Grid Bracket kit
>> 5200224 - Die Cast Bracket kit
> 
> So what we will need if we have a grid dish is a 5600687 and a 5200223, or
> do we need all 3 parts to make the HD mount work?
> 
> Thanks for your patience...
> 
> Mark Nash
> Network Engineer
> UnwiredOnline.Net
> 350 Holly Street
> Junction City, OR 97448
> http://www.uwol.net
> 541-998-5555
> 541-998-5599 fax
> 
> ----- Original Message ----- 
> From: "Marketing" <[EMAIL PROTECTED]>
> To: "'WISPA General List'" <wireless@wispa.org>
> Sent: Thursday, January 04, 2007 8:53 AM
> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
> 
> 
>> The L-Bracket is the main difference.  The hardware included in the kit
is
>> also a bit different due to the fact that the L-Bracket is tapped.
>>
>> Thanks,
>> Ben Moore
>> [EMAIL PROTECTED]
>>
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>> Behalf Of Mark Nash - Lists
>> Sent: Thursday, January 04, 2007 9:22 AM
>> To: WISPA General List
>> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>
>> Thanks...to confirm...
>>
>> It sounds like the only thing that is different is the L-Bracket to make
> it
>> the HDGD5X-XX?
>>
>> Mark Nash
>> Network Engineer
>> UnwiredOnline.Net
>> 350 Holly Street
>> Junction City, OR 97448
>> http://www.uwol.net
>> 541-998-5555
>> 541-998-5599 fax
>>
>> ----- Original Message ----- 
>> From: "Marketing" <[EMAIL PROTECTED]>
>> To: "'WISPA General List'" <wireless@wispa.org>
>> Sent: Thursday, January 04, 2007 7:47 AM
>> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>
>>
>>> Hello Mark,
>>>
>>> Yes, the new model will work fine with the stock that distributors have
> on
>>> hand or parts that have been shipped in the past.
>>>
>>> The parts can be purchased separately.  Part #'s are as follows:
>>>
>>> 5600687 - L-Bracket Only
>>> 5200223 - Wire Grid Bracket kit
>>> 5200224 - Die Cast Bracket kit
>>>
>>> Regards,
>>> Ben Moore
>>> [EMAIL PROTECTED]
>>>
>>>
>>> -----Original Message-----
>>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>>> Behalf Of Mark Nash - Lists
>>> Sent: Wednesday, January 03, 2007 11:45 PM
>>> To: WISPA General List
>>> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>
>>> Ben,
>>>
>>> A) Will these fit the models that the resellers have in stock now?
>>> B) If so, can we order mounts separately?
>>>
>>> Mark Nash
>>> Network Engineer
>>> UnwiredOnline.Net
>>> 350 Holly Street
>>> Junction City, OR 97448
>>> http://www.uwol.net
>>> 541-998-5555
>>> 541-998-5599 fax
>>> ----- Original Message ----- 
>>> From: "Marketing" <[EMAIL PROTECTED]>
>>> To: "'WISPA General List'" <wireless@wispa.org>
>>> Sent: Tuesday, January 02, 2007 10:32 AM
>>> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>
>>>
>>>> Hello Tim,
>>>>
>>>> When purchasing the grids the next time, select the HDGD58-29
> antennas.
>>>> These come with a new L-Bracket that attaches to the reflector in 4
>>>> locations.  The L-Bracket is also tapped for easy installation.  This
>> can
>>>> be
>>>> seen on page 2 of the spec sheet:
>>>>
>>>> http://pacwireless.com/products/GD58_Data_Sheet.pdf
>>>>
>>>> If needed, these new L-Brackets will accommodate a 4" U-Bolt (U-Bolts
>> not
>>>> provided).
>>>>
>>>> Drop me your address and we can send you a sample of the L-bracket.
>>>>
>>>> Let me know if you have any questions.
>>>>
>>>> Regards,
>>>> Ben Moore
>>>> Sales Manager
>>>> Pacific Wireless
>>>> [EMAIL PROTECTED]
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On
>>>> Behalf Of Tim Kerns
>>>> Sent: Saturday, December 30, 2006 6:48 PM
>>>> To: WISPA General List
>>>> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>>
>>>> Mac,
>>>> Have PacWireless made any changes to the mount on the 29db grids... I
>> have
>>>> 4
>>>>
>>>> in use and the mount isn't very solid. The grid deflects a lot in the
>>>> wind.
>>>> I can watch the signal go up and down as it moves.
>>>> Tim Kerns
>>>> CV-Access, Inc.
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Mac Dearman" <[EMAIL PROTECTED]>
>>>> To: "'WISPA General List'" <wireless@wispa.org>
>>>> Sent: Saturday, December 30, 2006 12:53 PM
>>>> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>>
>>>>
>>>>> I do use their dishes where I have a large enough tower, water tower
> or
>> a
>>>>> roof. I will tell ya though - - the 29dbi grids are mighty fine, much
>>>>> less
>>>>> expensive than a solid dish, wind load is no comparison as well as
> the
>>>>> ease
>>>>> of mounting. If you are leasing tower space - - the grid is a no
>> brainer
>>>>> unless you have to have the extra db that comes with a dish.
>>>>>
>>>>> Mac Dearman
>>>>>
>>>>> -----Original Message-----
>>>>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On
>>>>> Behalf Of Mark Nash - Lists
>>>>> Sent: Saturday, December 30, 2006 2:28 PM
>>>>> To: WISPA General List
>>>>> Subject: Re: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>>>
>>>>> Are we preferring their grids to dishes?
>>>>>
>>>>> Mark Nash
>>>>> Network Engineer
>>>>> UnwiredOnline.Net
>>>>> 350 Holly Street
>>>>> Junction City, OR 97448
>>>>> http://www.uwol.net
>>>>> 541-998-5555
>>>>> 541-998-5599 fax
>>>>> ----- Original Message ----- 
>>>>> From: "Mac Dearman" <[EMAIL PROTECTED]>
>>>>> To: "'WISPA General List'" <wireless@wispa.org>
>>>>> Sent: Saturday, December 30, 2006 12:18 PM
>>>>> Subject: RE: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>>>
>>>>>
>>>>>> Mark,
>>>>>>
>>>>>>  I have several 8 mile 5.3GHz links (YMMV) using PacWireless 26dbi
>>>>>> grids,
>>>>>> MT & CM9's. IMHO you can't go wrong using the PacWireless antennas.
> I
>>>>>> have
>>>>>> built a wireless network that covers 12% of Louisiana utilizing
> their
>>>>>> antennas exclusively for my BH. Well - I do have several of the
> Trango
>>>>>> dual
>>>>>> polarity ext's.
>>>>>>
>>>>>> Mac Dearman
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>> On
>>>>>> Behalf Of Mark Nash - Lists
>>>>>> Sent: Saturday, December 30, 2006 1:12 PM
>>>>>> To: WISPA General List
>>>>>> Subject: [WISPA] 5.3/5.8 GHz Antenna Suggestion
>>>>>>
>>>>>> I have usually used Trango backhauls, so I have not had to worry
> about
>> 5
>>>>>> GHz
>>>>>>
>>>>>> antennas and what to choose.  Now I'm going to try a MikroTik
> backhaul
>>>>>> with
>>>>>> a CM9.  Currently, I've got two applications:
>>>>>>
>>>>>> 1. 2-mile link that I can perhaps use 5.3GHz over.
>>>>>>
>>>>>> 2. 8-mile link that I'll go 5.8GHz over.
>>>>>>
>>>>>> What antennas have you used to accomplish links such as these...
>>>>>>
>>>>>> Also, kI have heard that the output power of the CM9 in a MikroTik
> can
>>>>>> be
>>>>>> adjusted.  Experience?
>>>>>>
>>>>>> Mark Nash
>>>>>> Network Engineer
>>>>>> UnwiredOnline.Net
>>>>>> 350 Holly Street
>>>>>> Junction City, OR 97448
>>>>>> http://www.uwol.net
>>>>>> 541-998-5555
>>>>>> 541-998-5599 fax
>>>>>>
>>>>>>
>>>>>>
>>>>>> -- 
>>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>>
>>>>>> Subscribe/Unsubscribe:
>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>
>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>>
>>>>>> -- 
>>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>>
>>>>>> Subscribe/Unsubscribe:
>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>
>>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>>
>>>>>
>>>>>
>>>>> -- 
>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>
>>>>> Subscribe/Unsubscribe:
>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>
>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>
>>>>> -- 
>>>>> WISPA Wireless List: wireless@wispa.org
>>>>>
>>>>> Subscribe/Unsubscribe:
>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>
>>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>>
>>>>>
>>>> -- 
>>>> WISPA Wireless List: wireless@wispa.org
>>>>
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>
>>>>
>>>>
>>>> -- 
>>>> WISPA Wireless List: wireless@wispa.org
>>>>
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>>
>>>
>>>
>>> -- 
>>> WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>>
>>>
>>> -- 
>>> WISPA Wireless List: wireless@wispa.org
>>>
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>
>>
>> -- 
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
>>
>>
>> -- 
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
> 
> 


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to