Dylan, If these are like the Jetway Mini-ITX boards with the 3 GE interfaces, MT does not support thet chipset on the GE interfaces. I contacted the MFR and MT and was told maybe next version. The drivers are not in MT for them.
http://www.mini-box.com/HYBRID-C7-1-2G?sc=8&category=99 and the daughterboard http://www.mini-box.com/VERSA-3-x-Gigabit-LAN-Port-Daughterboard?category=20 Sigh it was an awesome idea, but maybe V3 Stable?? Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dylan Oliver Sent: Friday, February 09, 2007 11:26 PM To: WISPA General List Subject: Re: [WISPA] Mikrotik RB and Cisco Switch port sync problems Hi Mac, I'm interested in what you have to say about RB44s in x86 .. Along somewhat similar lines, I've been looking at Migrus C787 mini-ITX boards with 3-port GE expansion cards. I'm assured that these are not 3-port switch cards but that each of the 3 has its own MAC. I might put a couple in one of these: http://www.caseoutlet.com/shopexd.asp?id=643 Anyone have experience with these? Best, -- Dylan Oliver Primaverity, LLC -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.441 / Virus Database: 268.17.34/679 - Release Date: 2/10/2007 4:08 PM -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
