But in reality, it's not any different than another WISP putting up a
900mhz tower... rfid falls under the same power regulations as everyone
else.
We have LOTS of 900mhz stuff in the air and it doesn't seem to have any
more noise issues than our 2.4ghz or 5.8ghz gear.
Travis
Microserv
George Rogato wrote:
When we were in DC a couple years ago they told us that rfid was going
900 so beware. You've just re - emphasized that fact.
S0 now we know, 900 is even worse for us to use than we previously
realized.
Ray & Jean wrote:
Hey All
We really appreciate you taking the time to offer your ideas on how to
resolve our problem.We have decided that switching to Hpol and
sectors will
be our fastest and cheapest way to resolve the issue which in the
long run
is probally a good idea to avoid future problems.We may try some of the
legal and publicity suggestions that were mentioned,but in the short
term it
looks like walmart wins.By the way we are located approx 2000 ft LOS
from
their docks.again thanks for all the advice.
Ray Hill
surfmore.net
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
