I prefer certified gear. Pre built and ready to install.
Having said that Dawn, when's the last time the FCC took a wisp to task for
using non certified configurations?
Hell, I've spent TWO YEARS trying to get an operator running over the eirp
limits (way over) dealt with and still no headway.
The bad (and in many ways good) think is that they just don't seem to care.
They want the consumer taken care of. When you think about it, we whine
about all of the things that the big boys get away with, all the while, we
get away with things too.
Shrug.
marlon
----- Original Message -----
From: "Dawn DiPietro" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Saturday, April 28, 2007 7:24 AM
Subject: Re: [WISPA] School WiFi / Wireless info ?
Rick,
There is no way you would be legit if you decided to do this on your own.
Considering the conversation that went on a few weeks back mentioned that
people used Mikrotik systems because of the feature set and not cost why
would you not buy an already certified system. To be safe I would go with
a system that is already certified instead of chancing it.
Regards,
Dawn DiPietro
Dawn DiPietro wrote:
Rick,
Does that mean we can take a 532 board and a cm9 and use it elsewhere
and consider it certified ?
No. You would have to use the exact same parts to be considered legal
from the antenna to the power supply. This would mean you would have to
get the manufacturer of all these parts in the trango system. If you took
this approach you would be taking on the responsibility to make sure this
really a was certified system.
I assume you read the FAQ that Jack Unger setup to answer these questions
about certification.
Regards,
Dawn DiPietro
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
