They tend to sell for comparable dollars to the Orthogon products. MSRP
is $12K - $16K depending on version. They also include at least 4 T1s
without tapping into the ethernet bandwidth. Seems each product has
it's sweet spot. Orthogon is great for dificult paths. Exalt is great
for low latency and T1s. Also with adjustable bandwidth it can fit in
between inteference, so may be good for crowded areas. And now for the
commercial, Electro-Comm is a master distributor for Exalt.
Mike B
George Rogato wrote:
How much?
Dylan Oliver wrote:
Brett Bonomo and Greg VanDell of Exalt provided amazing pre-sales
support
when I inquired about their 4.9 GHz gear for an RFP a few weeks ago.
Exalt
takes the cake in 4.9 GHz because of high guaranteed throughput (up
to 55
Mbps goodput with 20 MHz channel) and sync, which would allow many
more than
two links to be deployed from a central location. They can also do
sub-millisecond latency (or up to 5 ms for maximum throughput) and have
adjustable channel sizes - down to 5 MHz, I believe, with 1 MHz
spacing - to
help one fit into cluttered spectrum. All of these things apply to the
5.xtri-band product, except that it can do 13 Mbps (in 8 MHz) to 216
Mbps (in
64 MHz). The integrated tri-band radio/antenna looks like the most
flexible
option out there right now for shorter links where any of the three
bands
would work.
On 5/7/07, Mike Hammett <[EMAIL PROTECTED]> wrote:
http://www.exaltcom.com/
--
Mike Brownson
Electro-comm Distributing
5015 Paris St
Denver, CO 80239
www.electro-comm.com
(303) 371-8182 x112, (800) 525-0173
Your 24x7 support staff is at www.ShopECBIZ.com
We're your complete back-haul solutions source
---licensed, unlicensed, 1Mb to 1.25Gb---
In stock, from Tranzeo 900MHz PtMP
================================
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/