Mac:
We have used both of these with success:
http://www.tiltek.com/final/pdfs/TA-2304-4-180-ISM.pdf
http://www.tiltek.com/final/pdfs/TA-2304-2-180-ISM.pdf
The second one is smaller and only has 12.5 dBi gain, the first one has
15 dBi. Just to be clear I have no association or affiliation with
Til-Tek, just have used these on a couple of sites where three sectors
(our typical setup as well) was not an option.
Hope that helps.
* Larry A. Weidig ([EMAIL PROTECTED])
* Excel.Net,Inc. - http://www.excel.net/
* (920) 452-0455 - Sheboygan/Plymouth area
* (888) 489-9995 - Other areas, toll-free
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mac Dearman
Sent: Friday, May 18, 2007 8:26 AM
To: 'WISPA General List'
Subject: RE: [WISPA] 180* sector choices
Does anyone on list have a set of 2.4GHz 180* sector antennas they would
like to brag on? I have two towers that need to be sectored out and I am
on
the hunt. I would like to have as much gain as possible at the antenna.
Any suggestions, comments and feed back are greatly appreciated as I
have
never deployed 180* sectors, but we have always used either Omni's or 3
120*
sectors. These towers are just Rohn 25G and I cant seem to get enough
separation up top for the 120* sectors. Been there done that and still
fighting the issues it causes by mounting the 3 120* sectors too close
to
one another.
Thanks folks,
Mac
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
