It's probably a bad receive section on the ap. Try replacing the radio.
I've also seen water do strange things like this. Higher powered TX signals
get though ok, but receive ones don't.
Marlon
(509) 982-2181
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) WISP Operator since 1999!
[EMAIL PROTECTED]
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message -----
From: "Mark McElvy" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Friday, May 18, 2007 7:41 AM
Subject: [WISPA] Signal opinions
I run Mikrotik AP's, 15db 120 sectors, WLM54G radios, running Tranzeo
CPQ radios. I have noticed on one sector specifically but not positive
about the others, that the CPQ can see the AP with a -75 and the AP will
see the client a -90. I don't understand the disparity between the
radios.
Mark McElvy
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
