I had my bucket truck tested. Was only around $500. It was cool, passed
electrical up to 96kv!
Now if I can just get the upper controls fixed so I can actually use it!
marlon
----- Original Message -----
From: "Blake Bowers" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Tuesday, June 05, 2007 11:39 AM
Subject: Re: [WISPA] Want a bucket truck?
----- Original Message -----
From: "Mike Delp" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <[email protected]>
Sent: Tuesday, June 05, 2007 9:08 AM
Subject: RE: [WISPA] Want a bucket truck?
We had it refurbished by a truck center near her, and it is up to NFPA
standards on the ladder operation.
Really? You actually paid for the testing to make sure that is
compliant? Many Fire Departments in the US can't even afford
this.
In order to comply with NFPA 1914, one must recertify yearly, or after a
significant event. Fairly extensive procedure
done properly.
I have used it's lifting capacity to stack a 120' Rohn 25G tower in two
sections. It was really helpful in stacking that tower in an afternoon
without a crane expense.
Wow. Of course, you had your testing done AFTER using it as a
lifting platform, otherwise your certification was invalid.
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
