Bad radio or multipath.
Move it up or down by as little as 2', but you may have to move as far as
10' futher up or further down.
Look for ground, trees, power lines, buildings etc. NEAR the path.
laters,
marlon
----- Original Message -----
From: "Andrew Niemantsverdriet" <[EMAIL PROTECTED]>
To: <wireless@wispa.org>
Sent: Friday, November 16, 2007 4:22 PM
Subject: [WISPA] PowerStation2 Problem
I have a Ubiquiti PowerStaion2 that is having some weird issues. It
has a -68 signal and good LOS to the AP however there is packet loss
on the link but only from the Ethernet side of it. From the radio side
(pinging from the gateway) I see no such loss. The Ethernet drops from
10-30 seconds and then continues on like normal, when this happens I
can still ping from the gateway to the radio IP. This is running as a
bridge and has ver. 2.9 firmware on it, I upgraded from 2.8 to try to
fix the problem in a last ditch effort. Any ideas as to what is going
on? The AP is custom linux box and no other problems like this exist
on any of the other clients.
Thanks,
_
/-\ ndrew
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
