An XR9 by itself is probably to much for the WRAP board.
Remember the WRAPs have a fuse that blows on peaking 21 volts. So anything
higher than 18V regulated is risky.
As well, the power limit is not just the PS voltage it can take. The mPCI
bus is limited in watts its supports. Even the SR5 alone likely exceeds the
mpci bus specs.
I'm not saying you can't make it work, I'm just saying.
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message -----
From: "Mark McElvy" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Wednesday, December 12, 2007 4:48 PM
Subject: [WISPA] XR9 in a WRAP board
Just wondering if any knows if a WRAP board will support a WLM54G and
an XR9.
Mark
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.15.5/1085 - Release Date: 10/22/2007
10:35 AM
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
