We'll tell them you sent us. Looks perfect for so many things, especially temperature readings that we need here in the desert. Wish it had more relays, but we'll make do for now.
D. Ryan Spott wrote: > I use this device, with the remote monitoring built in for power and temp, > it is a lifesaver. > > I even have it setup to email my phone when someone opens the door to the > radio shelter some of my APs are at. Seems that those crazy HAMs have a > habit of turning off power to your APs "by accident" sometimes. > > <http://www.remotemonitoringsystems.ca/products.php> > > V2 has pretty granular monitoring built into it for voltage. V1 is not so > good at lower voltage measurements. > > The manufacturer has been GREAT via email for support. > > Hope this helps, > > ryan > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Randy Cosby > Sent: Wednesday, May 28, 2008 9:27 AM > To: WISPA General List > Subject: Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion? > > Not exactly what you want, but we're using this: > > http://www.dinrelay.com/ > > Includes autoping, etc. Only downside I've seen so far is that the > "reboot" functions don't work correctly if you use all your dc circuits > in "NC" - normally closed mode. We do that at a solar site to conserve > power. Without the relays being normally energized, it's very > power-efficient. > > Randy > > > Eric Albert wrote: > >> Here are a few links I have archived on the subject. Something is sure >> to work for your application. Good luck! >> >> >> http://www.nighthawksystems.com/products.html (Pager controlled switch) >> >> http://www.specpower.com/dcsmart.asp >> >> http://www.specpower.com/dcsmart.asp >> >> >> Eric Albert >> Application Engineer >> Alvarion, Inc. >> >> >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Jon Langeler >> Sent: Tuesday, May 27, 2008 6:46 PM >> To: WISPA General List >> Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? >> >> I'm looking for an AC relay to reboot our PoE radios and I'll explain as >> >> best I know. Basically we have 24/48V DC along with AC at our sites but >> our remote reboot controllers only have AC outlets on them. What I'm >> looking for is the ability to reboot our DC devices also with a sort of >> relay plugged individually into each rebootable AC port that would >> reboot each DC line individually. Any suggestions? >> >> Thanks >> >> Jon Langeler >> Michwave Tech. >> >> >> >> ------------------------------------------------------------------------ >> -------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ------------------------------------------------------------------------ >> -------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> ************************************************************************ >> ************ >> >> This footnote confirms that this email message has been scanned by >> >> PineApp Mail-SeCure for the presence of malicious code, vandals & >> computer viruses(190). >> >> ************************************************************************ >> ************ >> >> >> >> >> >> ************************************************************************ >> ************ >> >> This footnote confirms that this email message has been scanned by >> >> PineApp Mail-SeCure for the presence of malicious code, vandals & >> computer viruses(43). >> >> ************************************************************************ >> ************ >> >> >> >> >> >> >> > **************************************************************************** > ******** > >> This footnote confirms that this email message has been scanned by >> PineApp Mail-SeCure for the presence of malicious code, vandals & computer >> > viruses(84). > > **************************************************************************** > ******** > >> >> >> >> > ---------------------------------------------------------------------------- > ---- > >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> > ---------------------------------------------------------------------------- > ---- > >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
