So what you are saying is that if I have my 900mhz antenna on channel 11
(2.4 down-converting to 900) and then I have my 2.4AP on channel 1 that this
is ok on the same board?

Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
 
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George
Sent: Friday, June 13, 2008 4:42 PM
To: WISPA General List
Subject: Re: [WISPA] XR9 separation from other 2.4 stuff

Kurt

Your just going to want to stay off the same channel as the xr9 and you 
will be ok.


Kurt Fankhauser wrote:
> It is my understanding that the 900mhz cards are actually 2.4ghz with
> converters built in. So obviously putting a 900mhz card on the same board
as
> a 2.4ghz card would be a bad idea. Now can I put them on the same tower?
> Lets say I put the 900mhz radio at the bottom and run some coax since
900mhz
> should have much less cable loss I should be able to do this. I'll leave
the
> 2.4 stuff up top. But will the 900mhz antenna mounted in close proximity
to
> the 2.4 antenna pick up the 2.4 and allow it to still cause interference
to
> the radio below? Also would putting a 900mhz filter before the radio solve
> this?
> 
>  
> 
> Kurt Fankhauser
> WAVELINC
> P.O. Box 126
> Bucyrus, OH 44820
> 419-562-6405
> www.wavelinc.com
> 
>  
> 
>  
> 
>  
> 
> 
> 
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
----
>  
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/



----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to